Reloading Equipment – RW Hart and Son https://www.hartcustomrifles.com Hart Custom Rifles and Gunsmithing Mon, 14 Jul 2025 23:11:02 +0000 en hourly 1 https://wordpress.org/?v=6.9.4 https://www.hartcustomrifles.com/wp-content/uploads/2021/06/hart-custom-rifles-favicon.png Reloading Equipment – RW Hart and Son https://www.hartcustomrifles.com 32 32 Hart Neck Turning Tool Mandrel & Expander Kit https://www.hartcustomrifles.com/product/hart-neck-turning-tool-mandrel-expander-kit/ Sat, 12 Jun 2021 16:39:42 +0000 https://www.hartcustomrifles.com/?post_type=product&p=5688 One of the most important steps to extreme accuracy is that of turning the necks of your cases to match your chamber, and bullet. The match set of mandrel, and expander are caliber specific. They are available in the following calibers: .17, .20, .22, 6mm, .25, 6.5, .270, 7mm, .30, and .338

 

]]> Hart Case Holder https://www.hartcustomrifles.com/product/hart-case-holder/ Sat, 12 Jun 2021 16:39:05 +0000 https://www.hartcustomrifles.com/?post_type=product&p=5601 The Hart case holder is designed to be used with either a variable speed drill or an electric screwdriver. This tool was designed to be used with a Redding shell holder, but can be modified to fit other brands of shell holders. This tool was designed to be used with the Hart neck turning tool, when trimming cases, but can be used to polish cases, when used with a crazy cloth.

]]> Hart Loading Ramp – Long https://www.hartcustomrifles.com/product/hart-loading-ramp-long/ Sat, 12 Jun 2021 16:39:05 +0000 https://www.hartcustomrifles.com/?post_type=product&p=5602 This Hart loading ramp is made for Remington long actions, and can be modified for other actions. This ramp is made of aluminum, and weighs approximately 1.3 ounces.

]]> Hart Loading Ramp – Short https://www.hartcustomrifles.com/product/hart-loading-ramp-short/ Sat, 12 Jun 2021 16:39:05 +0000 https://www.hartcustomrifles.com/?post_type=product&p=5603 This Hart loading ramp is made for Remington short actions, and can be modified for other actions.  This ramp is made of aluminum, and weighs around 1.2 ounces.

]]> Hart Powder Funnel https://www.hartcustomrifles.com/product/hart-powder-funnel/ Sat, 12 Jun 2021 16:39:05 +0000 https://www.hartcustomrifles.com/?post_type=product&p=5614 Hart aluminum powder funnels. Available in the following calibers: .17,  .20,  .22,  6mm,  6.5,  .270,  7mm,  .30,  .338,   .38,  .45, & .50

]]> Hart Base For Wilson Style Die https://www.hartcustomrifles.com/product/hart-base-for-wilson-style-die/ Sat, 12 Jun 2021 16:39:05 +0000 https://www.hartcustomrifles.com/?post_type=product&p=5615 Base is 2.5″ across for better stability. The well that holds the die is deeper to prevent knock-overs. (Die not included)

]]> Crown Lap Tip .30 – 8MM https://www.hartcustomrifles.com/product/crown-lap-tip-30-8mm/ Sat, 12 Jun 2021 16:38:44 +0000 https://www.hartcustomrifles.com/?post_type=product&p=5575 This brass insert was designed to be used with the Hart crown lapping handle. This can also be placed in a drill press for lapping pistol crowns.

400 grit lapping compound suggested.

]]> Crown Lap Tip .338 – 9MM https://www.hartcustomrifles.com/product/crown-lap-tip-338-9mm/ Sat, 12 Jun 2021 16:38:44 +0000 https://www.hartcustomrifles.com/?post_type=product&p=5576 This brass insert was designed to be used with the Hart crown lapping handle. This can also be placed in a drill press for lapping pistol crowns.

400 grit lapping compound suggested.

]]> Crown Lap Tip .17 – .204 https://www.hartcustomrifles.com/product/crown-lap-tip-17-204/ Sat, 12 Jun 2021 16:38:44 +0000 https://www.hartcustomrifles.com/?post_type=product&p=5577 This brass insert was designed to be used with the Hart crown lapping handle. This can also be placed in a drill press for lapping pistol crowns.

400 grit lapping compound suggested.

]]> Flash Hole Deburring Tool, Hex Drive – Large, And Small https://www.hartcustomrifles.com/product/flash-hole-deburring-tool-hex-drive-large-and-small/ Sat, 12 Jun 2021 16:38:44 +0000 https://www.hartcustomrifles.com/?post_type=product&p=5561 To fight that “infernal” internal lid on the flash hole, use the Hart internal flash hole deburrer. Made of stainless steel, with a high speed cutter on the working end, this can be attached to a hand held screwdriver bit holder, or in a battery-powered screwdriver. This flash hole deburrer is available in both large, and small.

 

]]>